R200 DN8mm Class B Horizontal Direct Drinking Water Vane Wheel Water Meter

• Install: Horizontal
• Medium Temperature: Cold Water
• Level Measurement: B
• Counter Instructions: Analogue
• Nominal Diameter: 8mm
• Application: Civil
• Model NO.: LXHF-8
• Principle: Speed of Water Meter
• Medium Pressure: General Water Meter
• Work Environment: Dry Water Meter
• Stucture: Smart
• Manufacturer: Amico Shidai
• Factory Location: Ningbo
• Settlement Currency: USD
• Battery: No
• Transport Package: Industrial Packaging
• Specification: 8mm
• Trademark: AMICO
• Origin: Cn
• Production Capacity: 500000

Product Description

Product Description

*Application

Record the total amount of water flowing through the tap water pipeline.
 

Main Technical Data
Diameter	Overload Flow	Common Flow	Boundary Flow	Minimum Flow	Minimum read value	Maximum read value
mm	m^3/h		L/h		m^3
8	1.25	1	10	6	0.0001	9999999

*Feature
•Dry dial, convenient for reading, keep long-term cleanliness, long service life.
•Using high-quality materials ensure reliable performance, low starting flow rate, high measurement accuracy (up to R200), and durability.
•Use magnetic sensors ensures stable performance and high reliability.

*Conditions of Use
Water temperature: The working temperature for cold water meter between 0 ºC and 30 ºC, for hot water meter no higher than 90 ºC.
Pressure:≤l MPa

*Installation Requirements
•The water meter must be horizontally installed, with the reading surface upwards and the direction of the arrow being the same as the direction of the water flow.
•The pipeline must be flushed before installing the water meter.
•The water meter must be installed in a dry and easy to maintain environment, install in a dedicated water meter box is recommended.
•Valves must be installed at the inlet and outlet of the water meter.
•Valve controlled water meter is optional.
•Modules can be customized to according to different water quality.
 

LCD Display Instructions
Order	Contents	Message	Auxiliary Signs
1	Remaining water	XXXXXXX.X m3	Remaining sign+fault message(if applicable)
Explanation 1: The remaining quantity can be displayed as a negative number
Explanation 2: The fault information is as follows
Fault cause		Show contents
Low voltage		"KE-07" mark
Circuit board failure		"E-01" mark
Valve status		When valve failure show "valve on/off" sign, when valve open show "valve on" sign, when the valve closed show "valve off" sign.
Need recharge status		Show "recharge" sign when the remaining amount less than the alarm value

Factory Overview

Certifications

Brief Introduction