DN15mm-25mm Valve Controlled Nbiot Remote Dry Dial Multi-Jet Vane Wheel Water Meter

• Install: Horizontal
• Medium Temperature: Cold/Hot Water
• Level Measurement: B
• Counter Instructions: Analogue
• Nominal Diameter: 15mm-25mm
• Application: Civil, Industrial
• Model NO.: LXSF-15-25
• Principle: Speed of Water Meter
• Medium Pressure: General Water Meter
• Work Environment: Dry Water Meter
• Stucture: Wireless Communicating
• Manufacturer: Amico Shidai
• Factory Location: Ningbo
• Settlement Currency: USD
• Battery: No
• Transport Package: Industrial Packaging
• Specification: 15mm-25mm
• Trademark: AMICO
• Origin: Cn
• Production Capacity: 500000

Product Description

Product Description

*Feature
•Adopting low-power microprocessors and low-power processing mechanisms to extend battery life.
•Adopting NB-IOT technology to upload data on a regular basis or initiate alarms, automatically connecting to the network without needs for manual operation, which is easy to be  installed.
•Real  time monitoring of  battery voltage.
•Tiered water pricing can  be set through the software system.
•The upper computer can  remotely control the valve switch.
•Multiple upload modes can be set and  modified remotely on the software system.
•Proactively report daily water consumption data for 30 days.
•Supporting online upgrades.
•Regular on/off valve to prevent rust.

*Conditions of Use
Water temperature: The working temperature for cold water meter between 0 ºC and 30 ºC, for hot water meter no higher than 90 ºC.
Pressure:≤l MPa

*Maximum Permissible Error
Q₁≤Q<Q₂ ±5%;
Q₂≤Q≤Q₄ ±2%
 

*Installation Requirements
•The water meter must be horizontally installed(Vertical water meters must be installed vertically), with the reading surface upwards and the direction of the arrow being the same as the direction of the water flow.
•The pipeline must be flushed before installing the water meter.
•The water meter must be installed in a dry and easy to maintain environment, install in a dedicated water meter box is recommended.
•Valves must be installed at the inlet and outlet of the water meter.

 

Factory Overview

Certifications

Brief Introduction